Removing the central unit, expansion module, or interface module from a DIN rail
Step
Removing the central unit, expansion module, or interface module from a level surface
Step
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Operating instruction
1
Pull the device down until the lower half
can be pulled away from the DIN rail.
2
Pull the lower half of the device away
from the DIN rail.
3
Lift the device from the upper edge of
the DIN rail.
Operating instruction
1
Hold the device firmly.
2
Unscrew the cap screws.
3
Lift the device from the level surface.
4
Remove the securing brackets from the
device.
Description of the hardware
5.2 Mounting/installing/attaching
Figure
Figure
67