Messages - Siemens Sirius 3RK3 System Manual

8.3.4.1

Messages

The "Messages" menu option provides an overview of all current pending error messages
and warnings for the entire system.
Message categories
The following message categories may be displayed, according to the cause of error:
● Device error
● Group error
● Bus error
● Group warning
If multiple errors from different categories are pending, you can switch between the individual
error categories with the arrow keys.
Errors and error causes
You can access the pending error messages by pressing the right key (OK).
Different causes will be differentiated from one another for individual errors, e.g. in the event
of a configuration error. In this case, the cause can be displayed as plainttext with the right
key (OK).
If multiple errors / error causes from different categories are pending, you can switch
between the individual messages categories with the arrow keys.
With the left key, the display moves up one menu level.
Acknowledging errors
For individual errors, you can switch directly to the applicable function in the status menu by
marking the error message with the arrow keys and by pressing the right key (OK).
You can switch to the status display for the applicable function in the event the following
messages occur:
● Group warning from user program
● Wiring fault
● Logic error
● Group error from user program
In the "Status" menu, you can acknowledge the error after having dealt with it with the right
key (reset / test).
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Diagnostics / service
8.3 Diagnostics with diagnostics module
247