View Menu; Zoom In - Siemens Sirius 3RK3 System Manual

Description of the software
6.4 Description of the menu commands
Element messages...
● The "Diagnostics logic" > "Element messages..." menu command shows the status
messages for a function that is selected in the logic diagram. You can monitor status
messages of several functions simultaneously.
● This menu command can only be selected if the following conditions are met:
– The safety relay is opened online.
– The logic diagram with the safety circuit is active.
– At least one function must be selected.
Element reset
● The "Target system" > "Diagnostics logic" > "Element reset" menu command
acknowledges the errors of one or several selected functions.
● This menu command can only be selected if the following conditions are met:
– A safety relay is opened online.
– The logic diagram with the safety circuit is activated.
– One or several functions are selected.
Force
● The "Target system" > "Diagnostics logic" > "Force" menu command preassigns the
outputs of functions with fixed values (= forcing). You can select the following
assignments:
– Force to "0"
– Force to "1"
– Cancel forcing
– Cancel forcing (all)
● This menu command can only be selected if the following conditions are met:
– The "test mode" is activated.
– The logic diagram with the safety circuit is activated.
– An online connection is available.
– At least one connection of a function is selected.
6.4.4

View menu

6.4.4.1

Zoom in

The "View" > "Zoom in" command enlarges the current view by one zoom level.
This menu command can only be selected if the logic diagram is active.
118
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02