Control Functions; Device Command - Siemens Sirius 3RK3 System Manual

Description of the software
6.7 Functions
6.7.5

Control functions

6.7.5.1

Device command

Description
With the function "Device command", commands can be integrated in the safety relay and
connected device-specific.
When there is a positive edge "0 → 1" at the input IN, the command is executed.
Parameters
Parameter name
General Name
Element number
Element activated
Parameter Command type
180
Description/parameter value
You can enter a name for the element here.
Consecutive number which is automatically assigned. You can change
the number.
When this parameter is active, the function is processed in the safety
logic.
When the parameter is deactivated, the set substitute value is made
available at the output Q.
Execute no command
•
Reset
•
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02