Siemens Sirius 3RK3 System Manual page 143

Branches
● Branches are identified by a point.
● The system automatically sets the branch points. They cannot be selected and moved
directly.
● You can move branch points indirectly by moving connections.
Figure 6-5
Rerouting of connections
If you want to reroute the end (or beginning) of an existing connection to a different terminal,
then draw a new connection as follows:
1. Click on the corresponding connection (line) to select it.
2. Keep the mouse button pressed and drag one of the end points to another terminal.
Alternatively, you can reroute several connections to a terminal simultaneously:
1. Move the mouse pointer to the end point of a connection line until it is highlighted in blue.
2. Click into the blue rectangle.
3. Keep the mouse button pressed and reroute the connections to the respective terminal.
Moving a function/connection
● Keep the mouse button pressed to move functions and connections.
● When functions are moved, the start and end points of connections are fixed, since they
are linked to the terminals of functions.
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Branches
Description of the software
6.6 Logic diagram
141