Project; Messages During The Consistency Check - Identification - Siemens Sirius 3RK3 System Manual

Information
Description
Author
Comment
Note
This view cannot be edited in the online view.
6.5.1.3

Project

"Project" view
In the view "Identification" > "Project", you can edit the following descriptions:
● Project name
● Name of configuration engineer
● Configuration engineer's company name
Information
Project name
Name of configuration engineer
Configuration engineer's
company name
Configuration CRC
Configuration time stamp
Configuration released
Number of slot modules
Number of function elements
6.5.1.4

Messages during the consistency check - Identification

The consistency check is used to check whether the configuration is correct and complete.
A consistency check is carried out for the following actions:
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Meaning
You can enter additional information here. Max length: 54 characters
You can enter the name of the author of the entries here.
Here you can store additional information in the system or in the safety
relay.
Max. length for the Author and Comment input fields, taken together: 187
characters.
Meaning
Enter at least one character
Enter at least one character
Enter at least one character
Cyclic Redundancy Check which saves all safety-relevant
configuration data (4 bytes).
The transfer of safety-relevant configuration data through insecure
communication channels must be secured for the MSS ES safety
relay.
The MSS ES enters the current time stamp when a configuration
is saved.
Release status of the configuration. Details can be determined via
"Options" > "Release information".
Number of slot modules in the device configuration.
Number of function elements in the device parameter assignment.
Description of the software
6.5 Identification and configuration
127