Swap Slots; Central Unit Properties - Siemens Sirius 3RK3 System Manual

Object properties
Information on the selected module is displayed in this properties window, and you can
define parameters in it.
Optimize column width
Adapts the column width optimally to the column contents.
Editing options in the configuration view
Determine online
When an MSS ES is connected, you can adopt the actual configuration, i.e. the hardware
configuration of the MSS ES, by clicking on the button "Determine online". The user is asked
if the current configuration is to be replaced.
Show hardware configuration
When the checkbox "Show hardware configuration" is selected, an image with the modules
and their required arrangement is shown in the area below the checkbox.
Consistency check
The user can execute a consistency check by means of the menu command "Edit" > "Check
consistency" to determine whether the configuration is possible.
6.5.2.2

Swap slots

If, for example, all the slots are assigned and you want to reorganize your configuration, you
can swap the position of two expansion modules by means of the dialog "Swap slots":
1. Select the slot in the configuration table where one of the two expansion modules is
positioned.
2. Click the right mouse button.
3. Select "Swap slot" from the context menu.
4. The "Swap slot" dialog is opened.
5. Select the slot in the drop-down list where the other expansion module is positioned.
6.5.2.3

Central unit properties

In the dialog window "Central unit properties", the following parameters are shown:
● In online mode: The parameters of the uploaded module.
● Editable parameters
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
Description of the software
6.5 Identification and configuration
131