Tray Heater (Standard Tray); Installation Procedure - Ricoh AP-P2 G188 Field Service Manual

Tray Heater (Standard Tray)

Installation Procedure

1. Remove trays 1 and 2 from the machine.
2. Remove the connector cover [A] ( x 1).
3. Connect the connector [B] of the heater to the connector of the main machine.
4. Install the heater [C] inside the machine ( x 1)
5. Reassemble the machine.
6. Attach the on/standby decal [D] to the right-hand side of the main power switch.
Tray Heater (Standard Tray)
2
81