Ricoh AP-P2 G188 Field Service Manual page 407

017 Extra Idling Time (H)
018 Extra Idling Time (M)
019 Pressure TempThreshold
[Idling Before Job]
Paper Type -> Plain, Thin, Thick, OHP, Middle Thick, Special
Pressure Temp: Pressure Roller Temperature
Feed or Fusing Temp: Heating Roller Temperature
1104
Specifies the threshold temperature for the paper feed waiting in each mode.
The machine does not feed paper until the temperature of the pressure or heating roller
reaches temperatures specified by the following SPs.
001 Feed: Pressure Temp: Plain: FC *ENG
Feed: Pressure Temp: Plain:
002
FC:PR
Feed: Pressure Temp: Mid:
003
BW
004 Feed: Pressure Temp: Mid: FC *ENG
Feed: Pressure Temp: Plain:
005
BW: PR
Feed: Pressure Temp: Curl: M-
006
Humidity
Feed: Pressure Temp: Curl: H-
007
Humidity
010 Feed: Plain1: BW: Offset
011 Feed: Plain1: 2C: Offset
012 Feed: Plain1: 2C: Offset: P
*ENG
[0 to 250 / P2c: 20, P2d: 35 / 1 sec/step]
*ENG
*ENG [10 to 200 / 180 / 1 deg/step]
[10 to 150 / 20 / 1 deg/step]
*ENG
*ENG
[0 to 150 / P2c: 80, P2d: 100 / 1 deg/step]
*ENG [10 to 150 / 20 / 1 deg/step]
*ENG [10 to 150 / 90 / 1 deg/step]
*ENG [10 to 150 / 100 / 1 deg/step]
*ENG
[0 to 100 / 100 / 1 deg/step]
*ENG
*ENG [0 to 100 / 10 / 1 deg/step]
Engine Service Mode
8
149