Ricoh AP-P2 G188 Field Service Manual page 523

009 Toner Remain: Bk
010 Toner Remain: M
011 Toner Remain: C
012 Toner Remain: Y
Adjusts the threshold of toner near end for each color. The toner near end message appears
on the LCD when the remaining toner amount reaches this threshold. When one of these
013-016
SPs (SP3-101-009 to 012 or -032 to -035) reaches this threshold, toner near end is
detected.
013 Near End Thresh: Bk
014 Near End Thresh: M
015 Near End Thresh: C
016 Near End Thresh: Y
017-020 DFU
017 Crt Error Threshold: Bk
018 Crt Error Thresh: M
019 Crt Error Thresh: C
020 Crt Error Thresh: Y
Delta Vt Thresh
021
This SP is the threshold for toner end. Delta Vt: Vt-Vtref
When both this SP and SP3-101-026 occur at same time, toner end is determined.
Displays the total delta Vt (Vt-Vtref) value for each color.These are calculated by pixel
022-025
counting.
022 Delta Vt Sum: Bk
023 Delta Vt Sum: M
024 Delta Vt Sum: C
025 Delta Vt Sum: Y
026 Delta Vt Sum Thresh
*ENG
*ENG
[–50000 to 600 / 0 / 0.001 g/
step]
*ENG
*ENG
*ENG
*ENG
[0 to 600 / 50 / 1 g/step]
*ENG
*ENG
*ENG
*ENG
[–50000 to 0 / –50000 / 1 g/
step]
*ENG
*ENG
*ENG [0 to 5 / 0.5 / 0.01 V/step]
*ENG
*ENG
[0 to 655 / 0 / 0.01 V/step]
*ENG
*ENG
*ENG [0 to 255 / 10 / 1 V/step]
Engine Service Mode
8
265