Ricoh AP-P2 G188 Field Service Manual page 642

8. Appendix: SP Mode Tables
8 067
8 06x 1 Sort
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
8 06x 6 Punch
8 06x 7 Other
8
8 071
8 074
8 077
8 07x 1 1 Page
8 07x 2 2 Pages
8 07x 3 3 Pages
8 07x 4 4 Pages
8 07x 5 5 Pages
384
O:FIN Jobs
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
Number of jobs started in Sort mode. When a stored copy job is set for Sort
and then stored on the document server, the L: counter increments. (See SP8
066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in staple mode,
the Staple counter also increments.
Number of jobs started In any mode other than the Booklet mode and set
for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for a print job,
the P: counter increments. (See SP8 064 6.)
Reserved. Not used.
T:Jobs/PGS
These SPs count the number of jobs broken down by the number of pages in the job,
regardless of which application was used.
P:Jobs/PGS
These SPs count and calculate the number of print jobs by size based on the number
of pages in the job.
O:Jobs/PGS
These SPs count and calculate the number of "Other" application jobs (Web Image
Monitor, Palm 2, etc.) by size based on the number of pages in the job.
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
*CTL [0 to 9999999/ 0 / 1]
8 07x 8 21 to 50 Pages
8 07x 9 51 to 100 Pages
8 07x 10 101 to 300 Pages
8 07x 11 301 to 500 Pages
8 07x 12 501 to 700 Pages