Ricoh AP-P2 G188 Field Service Manual page 500

8. Appendix: SP Mode Tables
[Special 1: LE Cor] Special 1 Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2753 and SP2757 are multiplied by these SP values.
2771
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
• The paper leading edge area can be adjusted with SP2772.
001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: Plain: 1st
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2751 is multiplied by these SP values.
2771
• The paper leading edge area can be adjusted with SP2772.
005 Sep DC: Plain: 1st
006 Sep DC: Plain: 2nd
007 Sep DC: Plain: 1st
8
[SP1: LE Timing]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2772
paper leading edge between the erase margin area and the image area.
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: 1200: 1st
005 Sep DC: Plain: 1st
006 Sep DC: Plain: 2nd
007 Sep DC: Plain: 1st
242
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG [0 to 50 / 0 / 1 mm/step]
*ENG
*ENG [0 to 50 / 0 / 2 mm/step]
*ENG