Ricoh AP-P2 G188 Field Service Manual page 594

8. Appendix: SP Mode Tables
POP to SMTP Waiting
This SP sets the amount of time to allow for the connection to the SMTP server after the
008
transmission has connected to the POP server and been certified during the execution of POP
Before SMTP.
Mail Receive Protocol
009
This SP specifies a protocol for the mail reception or switches off receiving.
POP3/IMAP4 Auth.
013
This SP specifies whether password encryption is done for POP3/IMAP4 certification.
POP3 Srv Port No
014
This SP sets the number of the POP3 server port.
IMAP4 Srv Port No
015
This SP sets the number of the IMAP4 server port.
8
SMTP5 Rcv Port No
016
This SP sets the number of the port that receives SMTP mail.
Mail Rx Interval
017
This SP sets the timing for mail received at regular intervals.
Note: Setting this SP to "0" switches off receiving mail at timed intervals.
Mail Keep Setting.
019
This SP setting determines whether received mail is stored on the server.
336
[0 to 10000 / 300 / 1]
[1 to 3 / 1 / 1]
0: No receiving, 1: POP3 protocol
2: IMAP4 protocol, 3: SMTP protocol
[0 to 2 / 0 / 1]
0: Automatic, 1: No encryption done, 2:
Encryption done
[1 to 65535 / 110 / 1]
[1 to 65535 / 143 / 1]
[1 to 65535 / 25 / 1]
[2 to 1440 / 15 / 1 min.]
[0 to 2 / 0 / 1]
0: Received mail not stored
1: All received mail stored
2: Stores only mail that generated errors
during receiving