Ricoh AP-P2 G188 Field Service Manual page 510

8. Appendix: SP Mode Tables
[SP 3: TE Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2874
paper trailing edge between the erase margin area and the image area.
Thick 1: 154 mm/sec, 1200: 77 mm/sec
001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: Thick 1: 1st
005 Separation DC: TH 1: 1st
006 Separation DC: TH 1: 2nd
007 Separation DC: TH: 1st
[Special 3: Env Cor]
2880
Thick 1: 154 mm/sec, 1200: 77 mm/sec
001 Sep DC: Plain 1: 1st
002 Sep DC: Plain 1: 2nd
8
003 PTR: Thick 1: BW: 1st
004 PTR: Thick 1: BW:2nd
005 PTR: Thick 1: FC: 1st Side
006 PTR: Thick 1: FC:2nd
007 Sep DC: Plain: 1st
009 PTR: 1200: BW: 1st
011 PTR: 1200: FC: 1st
[OPC Drum Ctl Time]
2901
Adjusts the time when the OPC drum motor reverses from normal rotation after job end. DFU
Plain: 205 (P2c)/230 (P2d) mm/sec, Thick 1: 154 mm/sec, Thick 2&Fine: 77 mm/sec
252
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG [1 to 60 / 26 / 1 /step]
*ENG [1 to 60 / 32 / 1 /step]
*ENG
[1 to 60 / 11 / 1 /step]
*ENG
*ENG
[1 to 60 / 11 / 1 /step]
*ENG
*ENG [1 to 60 / 26 / 1 /step]
*ENG [1 to 60 / 11 / 1 /step]
*ENG [1 to 60 / 1 / 1 /step]