Ricoh AP-P2 G188 Field Service Manual page 566

8. Appendix: SP Mode Tables
004 Attack Max Num
[User Authentication]
5420
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
041 Printer
051 SDK1
061 SDK2
071 SDK3
[Authentication Error Code]
8
5481
These SP codes determine how the authentication failures are displayed.
001 System Log Disp
5501 [PM Alarm]
001 PM Alarm Level
5504 [Jam Alarm]
308
Sets a limit on the number of requests received for
certification in order to slow down the certification
speed when an excessive number of access
*CTL
attempts have been detected.
[50 to 200 / 200 / 1 attempt/step]
Determines whether certification is required before
a user can use the printer applications.
*CTL
[0 or 1/ 0 /1]
0: On, 1: Off
[0 or 1 / 0 / 1] 0: ON. 1: OFF
*CTL
Determines whether certification is required before
a user can use the SDK application.
Determines whether an error code appears in the
system log after a user authentication failure occurs.
*CTL
[0 or 1/ 0 /1]
0: Off, 1: On
*CTL -
[0 to 9999 / 0 / 1 /step]
0: Alarm off
1 to 9999: Alarm goes off when Value (1 to 9999) x 1000
≥ PM counter
*CTL -