Ricoh AP-P2 G188 Field Service Manual page 505

001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: Plain: 1st
005 Sep DC: Plain: 1st
006 Sep DC: Plain: 2nd
007 Sep DC: Plain: 1st
[Special 2: TE Cor] Special 2 Paper: Trailing Edge Correction
Adjusts the correction to the paper transfer roller current for the paper trailing edge in each
mode. SP2803 and SP2807 are multiplied by these SP values.
2823
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
• The paper trailing edge area can be adjusted with SP2824.
001 PTR: Plain: 1st
002 PTR: Plain: 2nd
003 PTR: Plain: 1st
005 Sep DC: Plain: 1st
006 Sep DC: Plain: 2nd
007 Sep DC: Plain: 1st
[SP2: TE Timing]
Adjusts the bias/voltage switch timing of the paper transfer roller/discharge plate at the
2824
paper trailing edge between the erase margin area and the image area.
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
*ENG
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
[0 to 400 / 100 / 5%/step]
*ENG
*ENG
*ENG
Engine Service Mode
8
247