Ricoh AP-P2 G188 Field Service Manual page 477

013 Paper Transfer: Plain: 1st Side: S4
017 Paper Transfer: Plain: 1st Side: S5
[Thin: Leading Edge Correction] Thin Paper: Leading Edge Correction
Adjusts the correction to the paper transfer roller current at the paper leading edge in each
mode. SP2453 and SP2457 are multiplied by these SP values.
2471
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
• The paper leading edge area can be adjusted with SP2472.
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Side
Adjusts the correction to the discharge plate current at the paper leading edge in each mode.
SP2451 is multiplied by these SP values.
2471
• The paper leading edge area can be adjusted with SP2472.
007 Separation DC: Plain: 1st Side
[Thin: Switch Timing: Lead. Edge]
Adjusts the bias/ voltage switch timing of the paper transfer roller/ discharge plate at the
2472
paper leading edge between the erase margin area and the image area.
Plain: 205 (P2c)/230 (P2d) mm/sec, 1200: 77 mm/sec
001 Paper Transfer: Plain: 1st Side
003 Paper Transfer: Plain: 1st Side
005 Separation DC: Plain: 1st Page
007 Separation DC: Plain: 1st Side
[100 to 600 / 160 / 5%/step]
*ENG
297 mm ≥ S2 size ≥ 275 mm (Pape r
width)
*ENG [100 to 600 / 180 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG [0 to 400 / 100 / 5%/step]
*ENG
*ENG
[0 to 50 / 0 / 2 mm/step]
*ENG
*ENG
Engine Service Mode
8
219