Ricoh AP-P2 G188 Field Service Manual page 580

8. Appendix: SP Mode Tables
Error Caused by Response
from GW URL
209 Instl Clear
8
250 CommLog Print
5821 [Remote Service Address]
002 RCG IP Address
[NV-RAM Data Upload]
Uploads the UP and SP mode data (except for counters and the serial number) from the
5824
NVRAM to an SD card. For details, see the "NVRAM Data Upload/Download" in this
section.
001 NV-RAM Data Upload
322
Attempted dial up overseas without the correct
-2385
international prefix for the telephone number.
-2387 Not supported at the Service Center
-2389 Database out of service
-2390 Program out of service
-2391 Two registrations for same device
-2392 Parameter error
-2393 RCG device not managed
-2394 Device not managed
-2395 Box ID for RCG device is illegal
-2396 Device ID for RCG device is illegal
-2397 Incorrect ID2 format
-2398 Incorrect request number format
Releases the machine from its Embedded RCG Gate setup.
NOTE: Turn off and on the main power switch after this
setting has been changed.
Prints the communication log.
Sets the IP address of the RCG (Remote
*CTL Communication Gate) destination for call
processing at the remote service center.
# -