Ricoh AP-P2 G188 Field Service Manual page 555

005 Pixel Count After Replacement
008 Coefficient
Notice Setting
011
NOTE:
If the toner collection bottle has been replaced before the machine detects used toner near
full when this setting is set to "0", the machine cannot detect toner collection bottle near full.
In that case, set SP3-902-017 to "1".
[New Unit Detection]
3900
Turns toner collection bottle full detection on or off.
001 ON/OFF Setting
[New PCU Detection]
3901
Turns new PCU detection on or off.
001 ON/OFF Setting
[Manual New Unit Set]
Turns the new unit detection flag for each PM unit on or off.
3902
The use of these counters is explained in the PM section and in the relevant parts of section
3 (Replacement and Adjustment).
001 Development Unit: Bk
002 Development Unit: Y
003 Development Unit: C
004 Development Unit: M
Displays the pixel counter after replacement
of toner collection bottle.
*CTL
[0 to 200000 / - / 1 cm
*ENG [0.5 to 1.5 / 1 / 0.1 /step]
Enables or disables the calling for @Remote.
[0 or 1 / 1 / - ]
*ENG
0: Enable @Remote calling
1: Disable @Remote calling
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
[0 or 1 / 1 / - ]
*ENG
0: OFF, 1: ON
*ENG
*ENG
[0 or 1 / 0 / - ]
0: OFF, 1: ON
*ENG
*ENG
Engine Service Mode
2
/step]
297
8