Ricoh AP-P2 G188 Field Service Manual page 557

[Accounting Counter]
Selects the counting method.
5045
NOTE: The counting method can be changed only once, regardless of whether the counter
value is negative or positive.
001 Counter Method
[TonerRefillDetectionDisplay]
5051
Enables or disables the toner refill detection display.
5051 1 Toner Refill Detection Display
[Display IP Address]
5055
Display or does not display the IP address on the LCD.
001 -
[Coverage Counter Display]
5056
Display or does not display the coverage counter on the LCD.
001 -
5131 [Paper Size Type Selection]
The program selects a paper size system from the following alternatives: the AB system (0),
001
the LT system (1), and the AF system (2).
[CE Login]
5169
If you will change the printer bit switches, you must 'log in' to service mode with this SP before
you go into the printer SP mode.
[0 or 1 / 0 / - ]
*CTL 0: Developments
1: Prints
[0 or 1 / 0 / - ] Alphanumeric
*CTL 0: ON
1: OFF
[0 or 1 / 0 / - ]
*CTL
0: OFF 1: ON
[0 or 1 / 0 / - ]
*CTL
0: Not display, 1: Display
*ENG [0: JP (Japan)/ 1: NA / 2: EU]
Engine Service Mode
8
299