Fusing Cleaning Felt - Ricoh AP-P2 G188 Field Service Manual

Fusing Cleaning Felt

1. Fusing unit (* p.173)
2. Heating roller (* p.174)
3. Remove the fusing cleaning felt [A].
When attaching a new fusing cleaning felt
Attach the fusing cleaning felt [A], aligning both edges of the fusing cleaning felt with the red lines on the
bottom cover.
• Make sure that the fusing cleaning felt is correctly attached to the frame. Otherwise, dust from the IH
coil unit may fall on the paper in the fusing unit and the output becomes dirty.
Fusing
4
179