Ricoh AP-P2 G188 Field Service Manual page 658

8. Appendix: SP Mode Tables
Input Check Table
When entering the Input Check mode, 8 digits display the result for a section. Each digit corresponds to a
different device as shown in the table.
Bit No.
Result 0 or 1
Printer
5803
5803 1 2nd Tray Size Detection
5803 2 1st Tray Set Detection
5803 3 1st Tray Paper Height Sensor1
5803 4 1st Tray Paper Height Sensor2
5803 5 2nd Tray Paper Height Sensor1
8
5803 6 2nd Tray Paper Height Sensor2
5803 7 1st Tray Paper End Detection
5803 8 2nd Tray Paper End Detection
5803 9 1st Tray Upper Limit Sensor
5803 10 2nd Tray Upper Limit Sensor
5803 11 Bypass Paper Width Detection
5803 12 Bypass Paper End Detection
5803 13 Bypass Paper Length Detection
5803 14 1st Paper Feed Sensor
5803 15 2st Paper Feed Sensor
5803 16 Exit Sensor
400
7 6 5
0 or 1 0 or 1
Description
4 3 2
0 or 1 0 or 1 0 or 1
0
See table 2 following this table.
Set
See table 1 following this table.
See table 1 following this table.
See table 1 following this table.
See table 1 following this table.
No paper
No paper
Not upper limit
Not upper limit
See table 3 following this table.
No paper
See table 3 following this table.
Paper detected
Paper detected
Paper detected
1 0
0 or 1 0 or 1
Reading
1
Not set
Paper remaining
Paper remaining
Upper limit
Upper limit
Paper remaining
Paper not detected
Paper not detected
Paper not detected