Ricoh AP-P2 G188 Field Service Manual page 549

013 Environmental Correction
014 K (Max Correction)
015 C (Max Correction)
016 M (Max Correction)
017 Y (Max Correction)
018 K (Max Abs Hum)
019 M (Max Abs Hum)
020 C (Max Abs Hum)
021 Y (Max Abs Hum)
[Vk Display]
3612
Displays Vk for each color.
001 Bk
002 M
003 C
004 Y
[Development DC Control: Display]
Plain: 205 (P2c)/230 (P2d) mm/sec, Thick 1: 154 mm/sec, Thick 2 & FINE: 77 mm/sec
3621
Displays the development DC bias adjusted with the process control for each line speed and
color.
001 Plain: Bk
002 Plain: M
003 Plain: C
004 Plain: Y
Turns on or off the environmental correction for
target development gamma.
*ENG
[0 or 1 / 1 / - ]
0: Not Correct, 1: Correct
*ENG
Adjusts the maximum correction value for each
*ENG
color. These SPs are effective only when the
setting of SP3-611-013 is set to "1".
*ENG
[0 to 5 / 0.1 / 0.01 mg/cm
*ENG
*ENG
Adjusts the maximum humidity correction
value for each color. These SPs are effective
*ENG
only when the setting of SP3-611-013 is set
*ENG
to "1".
[1 to 99 / 15 / 1 g/m
*ENG
*ENG
*ENG
[-300 to 300 / - / 1 V/step]
*ENG
*ENG
*ENG
*ENG
[0 to 700 / 550 / 1 -V/step]
*ENG
*ENG
Engine Service Mode
2
/kv/step]
3
/step]
8
291