Setting The Proxy Server - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

Parameterizing the Mobile Panel
5.8 Changing Internet settings
5.8.2

Setting the proxy server

Use this function to configure the type of Internet access.
Requirement
● You have opened the "Connection" tab in the "Internet Options" dialog with the
"Internet Options" icon.
①
②
● Your system administrator has provided the necessary information for the setting.
Procedure
1. If you want to use LAN without automatic dial-up, select the "Use LAN (no autodial)"
check box.
2. If you want to use LAN with automatic dial-up, deselect the "Use LAN (no autodial)" check
box and select the name in the "Autodial name" list.
3. If you are using a proxy server, select the "Access the Internet using ..." check box in the
"Network" group.
4. If you want to use a proxy server, select the "Use a proxy server" check box.
Specify the address and port of the proxy server. Only the start of the addresses is
required. Separate the addresses with a semicolon.
5. In order to prevent using the proxy server for certain addresses, press "Advanced".
The following dialog appears:
In the text box, enter the addresses for which the proxy server should not be used.
Only the start of the addresses is required. Separate the addresses with a semicolon.
Confirm your entries with "OK" or close the dialog with "Cancel".
6. To use a local address, select the "Bypass for local address" check box.
7. Confirm your entries.
The dialog closes.
The parameters for the LAN connection have been assigned.
102
LAN dial-up
LAN configuration
Operating Instructions, 08/2017, A5E39831415-AA
TP1000F Mobile RO