Display Firmware - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

Table of Contents

Advertisement

Parameterizing the Mobile Panel
5.7 General settings
Note
The size of the flash memory does not correspond to the available application memory.
5.7.10

Display firmware

You can use this function to obtain information about the firmware on the HMI device. You
will need this information if you contact Service and support (Page 184).
Requirement
You have opened the "Firmware" tab in the "OP Properties" dialog with the "OP" icon.
100
HMI device name
Version of the HMI device image
Version of the bootloader
Bootloader release date
Size of the internal flash memory in which the HMI device image and projects are stored
MAC address 1 of the HMI device
See "Restarting the HMI device (Page 86)."
Firmware version of the fail-safe module
Firmware version of the connection box
Operating Instructions, 08/2017, A5E39831415-AA
TP1000F Mobile RO

Advertisement

Table of Contents
loading

Table of Contents