Standards On Operating Safety - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

Technical specifications

9.2 Standards on operating safety

Marking for Australia
The HMI device and the connection boxes satisfy the requirements of Standard
AS/NZS CISPR 16.
Identification for Eurasion Customs Union
● EAC (Eurasian Conformity)
● Customs union of Russia, Belarus and Kazakhstan
● Declaration of conformity according to Technical Regulations of the Customs Union (TR
CU)
WEEE label (European Union)
Disposal instructions, observe the local regulations and the section "Recycling and disposal
(Page 154)".
9.2 Standards on operating safety
Plant-related standards
The Mobile Panel and the connection box meet the following standards for use in a plant:
Standard
DIN EN 12417:2001+A2:2009 Machine Tools - Safety - Machining Centres
EN 61000-6-2:2005
EN 61000-6-4:2007
+ A1:2011
DIN EN 61131-2:2007
TÜV
The TÜV confirms that the Mobile Panel and the connection box satisfy the requirements of
the following standards with regard to their safety functions:
Standard
DIN EN 60204-1:2006
DIN IEC 62061:2005 +
A1:2012
IEC 61508-1 to 4:2010
DIN EN 13850:2012
EN ISO 13849-1:2008
156
Title
Electromagnetic compatibility (EMC) – Part 6-2: Generic standards -
Immunity for industrial environments
Electromagnetic compatibility (EMC) – Part 6-4: Generic standard -
Emission standard for industrial environments
The HMI device meets the requirements and criteria according to
IEC 61131-2, Programmable Controllers,
Part 2: Equipment requirements and testing
Title
Safety of machinery – Electrical equipment of machines – Part 1:
General Requirements
Safety of machinery – Functional safety of electrical, electronic and
programmable control systems for machinery
Safety Integrity Level 3
Safety of machinery - EMERGENCY STOP - Principles for design
Performance Level e and Category 4
Operating Instructions, 08/2017, A5E39831415-AA
TP1000F Mobile RO