Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual page 136

Using a client
6.2 Connect client
Note
Response to a network fault
If a transient or long-term network fault occurs, the client repeatedly tries to establish a
connection to the server. You can abort this repeated attempt to establish a connection
with the
Note
When you change the IP address on the client, the client automatically connects to the
server. The network adapter is opened with an automatic IP address change and the new
IP address is set. It takes longer to establish the connection in this case.
2. Connect the client to the selected server using the
While the client is trying to connect to the server, the following message is displayed on
your HMI device:
Result
Once a connection to the server has been established, the following options are available:
● The server grants you access. The project running on the server is displayed. Depending
on your authorization, you can either monitor or operate the project on the server.
● The server grants you access. The Windows desktop of the server is displayed. If you
have operator authorization, you can launch your project via the appropriate desktop
icon.
● The server does not grant you access. The following message is displayed on your HMI
device:
You can abort the attempt to establish a connection using the
Once the server has rejected your access attempt, your client will remain unauthorized
until the server explicitly grants you access.
136
button.
button.
button.
Operating Instructions, 08/2017, A5E39831415-AA
TP1000F Mobile RO