Plug-In Terminal Strip X10; Wiring Of Safety-Related Operator Controls - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

Technical specifications
9.9 Connection box compact interfaces
9.9.3

Plug-in terminal strip X10

Plug-in terminal strip, 12-pin
Contact
9.9.4

Wiring of safety-related operator controls

Emergency stop/stop button
The figure below shows the wiring of the emergency stop/stop button in the connection box
compact.
176
Assignment
1 Functional grounding
2 M
3 P24
4 Not connected
5 ENABLE2–
6 ENABLE1+
7 ENABLE1–
8 ENABLE2+
9 STOP 24
10 STOP 23
11 STOP 14
12 STOP 13
Associated circuits and reference information
Ground and power supply
See "Connecting the functional grounding and power supply
to the connection box (Page 55)."
Enabling button
See section "Operating the enabling button (Page 67)" and
wiring information in the following section
Emergency stop / stop button
See section "Pressing the emergency stop / stop button
(Page 68)" and wiring information in the following section
Operating Instructions, 08/2017, A5E39831415-AA
TP1000F Mobile RO