The position of the emergency stop button makes it easily accessible. Due to its profiled
design, the emergency stop button is easily accessible. Two bumpers protect the emergency
stop / stop button against impact damage, for example, if it falls. The bumpers are
dimensioned so that the emergency stop / stop button can be activated during an impact.
The operator controls are described in the section "Handling the Mobile Panel (Page 65)".
Rear view and interfaces
The following figure shows the layout of the HMI device.
①
②
③
④
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
USB port with cover
Handle
Nameplate
Terminal compartment
⑤
Threaded sleeve for fixing screw of the cable retainer
⑥
Slot for an SD memory card
⑦
12-pin connector for the connecting cable
⑧
RJ45 socket PROFINET (LAN)
Overview
1.2 Design of the Mobile Panel
13