Table of Contents
Advertisement
4. Use the "Import.." button to specify the source from which the certificate will be imported.
The following dialog appears:
①
②
5. Select "From a File" or "From a Smart Card" if a smart card reader is connected to the
HMI device.
Note
The Smart Card reader is not an approved source for importing certificates for the HMI
device.
6. Close the dialog with "OK".
7. In the subsequent file selection dialog, select the desired certificate on the USB flash
drive and confirm with "OK".
The certificate will be imported and displayed in the list on the "Stores" tab.
8. You can use the "View.." button to display the properties of a certificate.
①
②
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
Import from a file
Import from a smart card reader
Name of the selected certificate
Identity information and other properties of the selected certificate
Parameterizing the Mobile Panel
5.8 Changing Internet settings
107
Advertisement
Table of Contents
