Security Mode; Overview; Using The Hmi Device In Password-Protected Security Mode - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

5.4

Security mode

5.4.1

Overview

You can protect the desktop icons, the taskbar and the "Settings" and "Taskbar" buttons in
the Start Center from unauthorized access. Security mode prevents unauthorized access.
Security mode can be activated if you have assigned a password as described in the section
"Entering and deleting a password (Page 90)". If the password is not entered, only the
"Transfer" and "Start" buttons can be operated.
NOTICE
Keeping the password
If the password is no longer available, you have no access to the Control Panel and the
taskbar. Backup password to protect it against loss.
5.4.2

Using the HMI device in password-protected security mode

If security mode has been activated, only the "Transfer" and "Start" buttons can be operated
without a password. To deactivate security mode, delete the password as described in
"Entering and deleting a password (Page 90)".
Requirement
● A password has been assigned as described in "Entering and deleting a password
(Page 90)".
● The security mode is displayed, similar to the figure below:
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
Parameterizing the Mobile Panel
5.4 Security mode
75