Emitted Interference; Immunity To Interferences; Mechanical Ambient Conditions; Transport And Storage Conditions - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

9.3.2

Emitted interference

The HMI device meets the requirements of EN 61000-6-4. The HMI device complies with
limit class A.
The connection boxes meet the requirements of EN 61000-6-4. The HMI device complies
with limit class A.
Note
The HMI device and connection boxes are not designed for use in residential areas.
Operation of an HMI device and connection box in a residential area can interfere with radio
and TV reception.
9.3.3

Immunity to interferences

The HMI device meets the requirements of EN 61000-6-2.
The connection boxes meet the requirements of EN 61000-6-2.
9.4

Mechanical ambient conditions

9.4.1

Transport and storage conditions

The following information applies to an HMI device and connection box transported and
stored in its original packaging.
The HMI device meets the requirements of IEC 60721-3-2, Class 2M2 with the following
amendments and limitations:
Type of condition
Free fall
Vibration to IEC 60068-2-6
Shock to IEC 60068-2-27
9.4.2

Operating Conditions

The HMI device is designed for mobile operation in a location protected from the weather.
The HMI device meets the requirements of IEC 60721, Class 3M3 with the following
amendments and limitations:
The following information applies to the HMI device and to the connection box.
Type of condition
Vibration to IEC 60068-2-6
Shock to IEC 60068-2-27
Free fall tested to IEC 60068-2-31, knocking
tested over according to IEC 60068-2-31
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
9.4 Mechanical ambient conditions
Permitted range
≤ 1 m
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 500 Hz, acceleration 1 g
250 m/s , 6 ms, 1000 shocks
2
Permitted range
5 ... 8.4 Hz, deflection 3.5 mm
8.4 ... 200 Hz, acceleration 1 g
150 m/s , 11 ms, 3 shocks
2
1.2 m free fall
Technical specifications
159