Preface - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

Preface

Purpose and knowledge
Purpose of the operating instructions
These operating instructions contain information based on the requirements defined by DIN
EN 62079 for mechanical engineering documentation. This information relates to the place of
use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for:
● Users
● Commissioning engineers
● Maintenance personnel
Basic knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions. Knowledge of personal computers and the Microsoft
operating systems is required to understand this manual.
Scope and brands
Scope of the document
The operating instructions apply to the following HMI device in combination with the
corresponding connection boxes and the RemoteOperate V4.0.0.1 software:
● SIMATIC HMI TP1000F Mobile RO, article number 6AV2145-6KB10-0AS0
The HMI device is technically based on the Mobile Panels 2nd Generation and is therefore
also referred to as "Mobile Panel 2nd Generation" or "HMI device of the type KTP Mobile" is
this document, see section "Conventions".
The corresponding connection boxes with article numbers and information on compatibility
can be found in the following sections:
● Connection boxes (Page 15)
● Mobile Panel and connection box compatibility (Page 24)
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
3