Opening And Closing Connection Box Standard And Connection Box Advanced - Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual

3.6.2

Opening and closing connection box standard and connection box advanced

The connection boxes standard and advanced must be opened for connecting and setting
the box ID. To avoid damage to the connection box, read the information in the section
"General safety instructions (Page 25)" about working in and on electrical systems and about
ESD.
Requirement
● The connection box is de-energized.
● Screwdriver, T10
Procedure
Open
①
②
1. Loosen the 4 screws
2. Lift the cover
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
Cover
Screws
②
.
①
carefully, because the seal may stick to the lid and can be pulled out.
Installing system components
3.6 Connecting the connection box
51