Siemens SIMATIC HMI TP1000F Mobile RO Operating Instructions Manual page 126

Parameterizing the Mobile Panel
5.13 Functions for service and commissioning
9. To restore the delivery state of the HMI device and set all device parameters to their
default values, enable "Reset to factory settings".
10. In the "Start Center" of the HMI device, click on the "Transfer" button.
11. On the PC in ProSave, click on the "Update OS" button.
Follow the instructions in ProSave.
The operating system on the HMI device is updated. A status display shows the progress.
A message is displayed when the operating system update is successfully completed.
Result
You have successfully installed the operating system and the RemoteOperate Client
application on the HMI device.
Note
After restoring, a recalibration of the touch screen may be required.
See also
Backing up and restoring data (ProSave) (Page 123)
126
Operating Instructions, 08/2017, A5E39831415-AA
TP1000F Mobile RO