Table of Contents
Advertisement
5.5.4
Display types for the screen keyboard
The screen keyboard is used for entering alphanumeric, numeric and special characters. As
soon as you touch a text box, a numeric or alphanumeric screen keyboard is displayed,
depending on the type of the text box.
You can also open the screen keyboard by selecting the icon in the status bar. The icon is
shown in the figure in section "Overview of functions (Page 77)".
The procedure for setting the screen keyboard is described in the section "Configuring the
screen keyboard (Page 82)".
Representation types for the screen keyboard
You can toggle the screen keyboard display as follows.
Alphanumerical screen keyboard
The alphanumerical screen keyboard has the following levels.
● Normal level
Note
The ' character on the keyboard is only displayed when followed by a space. If the '
character is followed by a letter, then the result will be an accent, such as "á".
● Shift level
The shift level has uppercase letters and other special characters.
The alphanumeric keyboard is always displayed after a restart.
Numerical screen keyboard
By pressing the "Num" button, you can switch between the numerical and alphanumerical
screen keyboard.
Reduced screen keyboard
You activate the reduced screen keyboard with the
TP1000F Mobile RO
Operating Instructions, 08/2017, A5E39831415-AA
Parameterizing the Mobile Panel
5.5 Control Panel
key.
79
Advertisement
Table of Contents
