Installing The Screw-In Raid Controller Card - Huawei FusionServer Pro CH121 V5 User Manual

FusionServer Pro CH121 V5 Compute Node
User Guide
Step 5 Check the indicator status of the M.2 FRU.
For details, see
----End

5.2.2 Installing the Screw-in RAID Controller Card

Step 1 Power off the compute node.
For details, see
Step 2 Remove the compute node.
For details, see
Step 3 Place the compute node on the ESD workstation.
Step 4 Remove the cover.
For details, see
Step 5 Check whether a PCIe card is installed.
l
l
Step 6 Remove the PCIe card.
For details, see
Step 7 Take the spare part out of its ESD bag.
Step 8 Determine the position of the screw-in RAID controller card.
Figure 5-3 Position of the screw-in RAID controller card
Issue 06 (2019-08-10)
M.2 FRU Indicators.
3.1 Power-Off
3.3 Removing a CH121
3.5 Removing the
If yes, go to Step 6.
If no, go to Step 7.
3.11 Removing a PCIe
Copyright © Huawei Technologies Co., Ltd.
Procedure.
V5.
Cover.
Card.
5 Optional Part Installation
95