Real-Time Data Page - Huawei RMS-SNMP01A User Manual

RMS-SNMP01A SNMP Card
User Manual
Area
UPS running diagram
UPS information area
Communication status bar

4.4.2 Real-Time Data Page

In the UPS information area, click Real-Time Data > UPS, you can view the UPS running
data on the Real-Time Data page. The data includes the input voltage and frequency, bypass
voltage and frequency, output voltage, current, frequency, load ratio, power, battery voltage,
current, temperature, and backup time.
the CIM function is used, in the UPS information area, choose Real-Time Data > Battery
String, and select the battery string number under the UPS (the UPS can connect to multiple
battery strings) to view the battery string data and corresponding detected battery data, as
shown in
Issue 08 (2020-01-09)
Figure 4-11.
If battery string information is not configured in Param. Settings > Battery String Settings, the Battery
String control bar will not be displayed on the Real-Time Data page.
Copyright © Huawei Technologies Co., Ltd.
4 Managing the UPS on the WebUI
Function
including critical alarms, major alarms
minor alarms, and warning.
Shows the UPS running information,
including input and output parameters,
battery parameters, power flow,
environment parameters, and working
mode.
Provides four pages: Active Alarms,
Real-Time Data, Param. Settings, and
Control.
Displays the current user name, Ethernet
connection status, IP address of the SNMP
card, time, and SMS module status.
Figure 4-10 is shown in the UPS running diagram. If
30