BENSHAW RSi GX Series Hardware Manual page 66

6 - Parameter Descriptions
Frq: Frequency Setting Method
Range:
Description:
60
0 - 7 (Default: 0)
This parameter selects the method of speed control for the drive.
Keypad Frequency Mode 0
Set Frq [Frequency Mode] to 0 (Frequency setting via Keypad 1).
•
Set the desired frequency in 0.00 and press the Prog/Ent key to enter the
•
value into memory.
The value is settable less than parameter F21 (Max. Frequency).
•
Keypad Frequency Mode 1
Set Frq [Frequency Mode] to 1 (Frequency setting via Keypad 2).
•
The desired frequency in 0.00 is changed upon pressing the Up/Down
•
key. In this case Up/Down keys serve as a potentiometer.
The value is settable less than parameter F21 (Max. Frequency).
•
z Note: When remote keypad is connected, keypad keys on the body are
deactivated.
Frequency Setting Mode 2
Set Frq [Frequency Mode] to 2 (Frequency Setting via -10V - +10V
•
Input).
The set frequency can be monitored in 0.00 [Frequency Command].
•
See I1 through I10.
•
Frequency Setting Mode 3
Set Frq code [Frequency Mode] of Drive group to 3 (Frequency setting
•
via 0-10V Input/Terminal Potentiometer).
0-10V can be directly applied from an external controller or potentiometer
•
connected on terminals VR, V1 and CM.
See I6 through I10.
•
Frequency Setting Mode 4
Set Frq code (Frequency Mode] of Drive Group to 4 (Frequency setting
•
via 0-20mA input).
Frequency is set via 0-20mA input between I and CM terminal.
•
See I11 through I15.
•
Frequency Setting Mode 5
Set Frq code (Frequency Mode] of Drive Group to 5 (Frequency setting
•
via -10 ~ +10V voltage input + 0 ~ 20mA input )
Override function available using Main/Auxiliary speed adjustment
•
Related code: I1 - I5, I6 - I10, I11 - I15
•