How To Change The Codes In A Group - BENSHAW RSi GX Series Hardware Manual

4 - Operation
To move from the F15 to function group 2
•
F 15
1
F 0
2
H 0
3
4.2.2

How to Change the Codes in a Group

Code change in Drive group
•
0.00
1
ACC
2
dEC
3
drC
4
0.00
5
z Note: Use Down (q) key for the opposite order.
Code Jump
•
When moving from parameter "F 0" to "F23" directly.
F 0
1
1
2
03
3
23
4
F 23
5
z Note: Function group 2 and I/O group are settable with the same setting.
38
In F15, press the left (t) or right (u) key. Pressing the key goes to the
first code of the group.
The 1st codein function group 1 "F0" is displayed.
Press the right arrow (u) key.
The 1st code in function group 2 "H 0" will be displayed.
In the 1st code in Drive group "0.00", press the Up (p) key once.
The 2nd code in Drive group "ACC" is displayed.
Press the Up (p) key once.
The 3rd code "dEC" in Drive group is displayed.
Keep pressing the Up (p) key until the last code appears.
The last code in Drive group "drC" is displayed.
Press the Up (p) key again.
Return to the first code of Drive group.
Press the Ent (˜) key in "F 0".
1 (the code number of F1) is displayed. Use the Up (p) key to set to 3.
"03" is displayed by pressing the Left (t) key once to move the cursor
to the left. The numeral having a cursor is displayed brighter. In this
case, 0 is active. Use the Up (p) key to set to 2.
3 is set.
Press the Ent (˜) key once.
Moving to F 23 has been complete.