BENSHAW RSi GX Series Hardware Manual page 133

Range:
Description:
Range:
Description:
Range:
Description:
I57: Output Terminal Select When Communication Error Occurs
0-3 (Default: 0)
Keypad and drive CPU communication is made by serial communication,
delivering information. When communication error occurs for a certain
time, "ERR" will be displayed and error signal can be output to MO or
relays.
Select relay output or open collector output when keypad-drive
communication fails.
MFI MFI
output output
relay terminal
Bit 1 Bit 0
0 0
1 0
2 1
3 1
0 - Modbus RTU
This parameter determines whether RTU or ASCII ModBus will be used for
remote communications, or whether another fieldbus will be used.
1 - 32 (Default: 1)
Drive number sets the drives ID number for RS485 communication.
6 - Parameter Descriptions
0 Not used
1 Signal output to MO
0 Signal output to 3A, 3B, contacts.
1 Signal output to MO, 3A, 3B
I59: Communication Protocol Select
Description
I60: Drive Number
127