BENSHAW RSi GX Series Hardware Manual page 116

6 - Parameter Descriptions
H95: Parameter Lock
Range:
Description:
110
0 - FFFF (Default: 0)
This function is used to lock the parameters from being changed. When the
parameters are locked, the display arrow changes from solid to dashed line
indicating that the parameters have been locked. This parameter is able to
lock or unlock parameters by typing the password registered in H94.
To lock the user-set parameter via the H94 [Password Register]:
Step
1 Move to H95 code.
2 Press Enter (˜) key.
Parameter value can be changed in UL (Unlock)
3
status.
4 Press Enter (˜) key.
5 Enter the password created in H94 (e.g.: 123).
6 Press Enter (˜) key.
Parameter value cannot be changed in L (Lock)
7
status.
8 Press Enter (˜) key.
To unlock the user-set parameter via password:
Step
1 Move to H95 code.
2 Press Enter (˜) key.
Parameter value cannot be changed in L (Lock)
3
status.
4 Press Enter (˜) key.
5 Enter the password created in H94 (e.g.: 123).
6 Press Enter (˜) key.
Parameter value can be changed in UL (Unlock)
7
status.
8 Press Enter (˜) key.
Note
Note
Keypad Display
H94
UL
UL
0
123
L
L
H95
Keypad Display
H94
L
L
0
123
UL
UL
H95