BENSHAW RSi GX Series Hardware Manual page 27

Protect from moisture and direct sunlight.
•
Do not install the drive in any environment where it is exposed to waterdrops, oil mist,
•
dust, etc. Install the drive in a clean place or inside a "totally enclosed" panel any
suspended matter is not entered.
When two or more drives are installed or a cooling fan is mounted in a panel, the drives
•
and fan must be installed in proper positions with extreme care to keep the ambient
temperature below the permissible range.
Install the drive using appropriate sized screws or bolts to insure the drive is firmly
•
fastened.
Panel
Drive
Drive
Cooling fan
GOOD (O)
[When installing several drives in a panel]
z Note: Take caution on proper heat ventilation when installing drives and fans in a
panel.
Risk of Electrical Shock
More than one source of power may be present. More
than one disconnect switch may be required to
de-energize the equipment before servicing.
3 - RECEIVING AND INSTALLATION
Panel
Ventilating fan
Drive
Drive
BAD (X)
[When installing ventilating fan in a panel]
CAUTION
)
GOOD (O
BAD (X)
21