System Menu; Additional Settings - Siemens DCA Vantage Operator's Manual

Select . . . then . . .
MicroAlbumin View Last 10
Patient ID/Name
Date Range
Comment 1
Export

System Menu

Select from the Home screen to access Control Tests, System
Menu
Maintenance, System Settings, and System Tests. You can also schedule and
change the configuration of control tests.
Table 2 Menu
Select . . .
Control Tests
System Maintenance
System Settings
System Tests

Additional Settings

Select Additional Settings
system and add external devices.
20
to . . .
see the last 10 results performed.
search by Patient ID or last name. The sort
order is the reverse order in which the tests
were run. If a Patient ID or Last Name is not
entered for the patient, the field will be blank.
You also can delete test results. You can use
a wildcard (%) character in the recall search.
enter a Start and End Date to search patient
results for a specific time period.
search by the first comment of the up to 8
available comments. To perform a wildcard
search, use the percent (%) sign at the end
the entry.
copy data to a USB storage device.
to . . .
see a read-only status of required and
optional Control tests. Select
to 100 entries.
view the list of maintenance tasks and the
status of each one. A task that has been
performed can be selected and marked as
complete on this screen. This task also
appears on the System Maintenance Log
screen.
change sound volume, adjust the display
contrast, access Additional Settings menu,
and view current settings.
perform system tests including testing
printers, barcode readers, external ports,
optical tests, and calibrating the touchscreen.
from the System Settings screen to customize the
to see up
Log
DCA Vantage Operator's Guide