Saving Data And Settings; Restoring Settings - Siemens DCA Vantage Operator's Manual

Any existing data in the database is replaced by the data on the
NOTE:
backup database. If the current database and the backup database versions
are different, the backup fails.
1. At the Home screen, select
2. At the Menu screen, select
3. At the System Settings menu, select
4. At the Additional Settings menu, select
5. Select
Restore Data
6. To start the restoration, select
7. Insert a storage device into the USB port, then select
The data is restored.
8. Remove the storage device from the USB port.

Saving Data and Settings

The Save Data and Settings screen instructs you to insert the storage device
into the Universal Serial Bus (USB) port. The entire database is copied to the
device.
1. At the Home screen, select
2. At the Menu screen, select
3. At the System Settings menu, select
4. At the Additional Settings menu, select
5. Select
Save Data and Settings
6. Insert a storage device into the USB port, then select
The data and settings are saved.
7. Remove the storage device from the USB port.

Restoring Settings

The Restore Settings screen instructs you to insert the storage device with the
saved settings into the USB port. The restoring the system settings replaces
your current system settings with the settings from your storage device.
Any existing setting in the database is replaced by the settings on the
NOTE:
backup database. If the current database and the backup database versions
are different the backup fails.
1. At the Home screen, select
2. At the Menu screen, select
3. At the System Settings menu, select
4. At the Additional Settings menu, select
148
.
Menu
System Settings
Additional Settings
General
.
.
Next
.
Menu
System Settings
Additional Settings
General
.
.
Menu
System Settings
Additional Settings
General
.
.
.
.
Next
.
.
.
.
Next
.
.
.
DCA Vantage Operator's Guide