7. Insert the cartridge into the compartment until you hear a snap.
The cartridge is designed to fit one way into the system.
NOTE:
Figure 39 Inserting the Optical Test Cartridge into Compartment
8. Close the door.
The test runs for 6 minutes.
9. Print the results.
10. Remove the cartridge:
a. Open the cartridge compartment door.
b. Locate the button on the right side of the cartridge compartment.
c. Push and hold down the button with your right hand.
d. Gently push the plastic tab on the cartridge to the right with your left
hand.
This releases the cartridge.
e. Pull the cartridge out of the compartment.
System Tests
You or your technical support provider can use the System Test menu screen
to perform tests on the DCA Vantage system. The System Test menu screen
includes the following types of System Tests:
•
User System Tests
•
Service System Tests (Performed by your technical support provider.)
108
DCA Vantage Operator's Guide