Removing The Reagent Cartridge - Siemens DCA Vantage Operator's Manual

A supervisor (that is, a Level 1 operator) can designate the required primary
and optional secondary HbA
setting, the system displays the appropriate primary, and optional secondary
HbA reporting units. See Designating the Primary and Secondary HbA1c
1c
Reporting Units‚ page 153.
You can print, enter, or edit the sample data while the results are
NOTE:
displayed.

Removing the Reagent Cartridge

When the tests are complete, remove the reagent cartridge from the system.
1. Open the cartridge compartment door.
2. Locate the button on the right side of the cartridge compartment.
3. Push and hold it down with your right hand.
4. With your left hand, gently push the tab on the cartridge to the right.
This action releases (unlocks) the cartridge.
1 Reagent Cartridge
2 Release Button
Figure 16 Removing the Reagent Cartridge
62
reporting units for printing data. Based on this
1c
DCA Vantage Operator's Guide