Volume And Display; Setting The Sound Volume; Setting The System Display - Siemens DCA Vantage Operator's Manual

Table of Contents

Advertisement

5. Select
Sequence Number
CAUTION
If you are using a RAPIDComm
must enable sequence numbers so that RAPIDComm can detect
duplicate transmissions. Failure to do so can result in a patient
result record being sent to the Laboratory or Hospital Information
System more than once.
6. Select a sequence number reset:
Resets Daily – the sequence number is reset daily
Resets after 999 – the sequence number resets after it reaches 999
None – no sequence number is set
7. To save the sequence number setting, select

Volume and Display

Use the System Settings menu to access screens to configure the sound
volume and display contrast and brightness.

Setting the Sound Volume

Use the Sound Volume setting to set the volume of the audible alerts.
1. At the Home screen, select
2. Select
System Settings
3. At the System menu, select
4. Select
Sound Volume
5. Select one of the following options:
High
Medium
Low
Off
6. Select
.
Save
The sound volume is set.

Setting the System Display

Use the System Display screen to set the contrast of the color display.
1. At the Home screen, select
DCA Vantage Operator's Guide
.
®
data management system, you
.
Menu
from the Menu screen.
System Settings
.
.
Menu
.
Save
.
163

Advertisement

Table of Contents
loading

Table of Contents