Table of Contents
Advertisement
Section 2
Top Level of
Installation
Menu
Current
Selection
Pressing the ENTER key now would switch the "greater than" symbol to a colon (:). The colon indi-
cates that the data listed on the second line can be edited. This convention applies to all menu cells
that provide option lists throughout the Installation Menu. If the menu cell requires a numeric value, the
ENTER key switches the "greater than" (>) character to an equal sign (=) instead. The equal sign
indicates that you can edit the numeric value.
2.6.2 SYSTEM 1020 INSTALLATION MENU STRUCTURE
The Single Channel 1020 Installation Menu is shown in its entirety below and on the next page. The
<Left, Right, Up and Down Arrows> move you through the menu structure. For example, pressing the
<Right Arrow> from [Meter Type] changes the display to [Single Channel]. Similarly, pressing the <Left
Arrow> from [Single Channel] moves you back to [Meter Type].
Meter Type
Single Channel
Meter Type
>Single Channel
INSTALLATION MENU STRUCTURE
Channel Setup
Pipe Data
Application Data
Pick/Install Xdcr
2-8
W ide B eam
Wide Beam
C lamp-O n
Clamp-On
Ultrasonic
U ltrasonic
Flowmeter
Flow meter
Recall Site
Channel Enable
Create/Name Site
Site Security
Delete Site
Save/Rename Site
Pick Pipe Class
Select Pipe Size
Pipe OD
Pipe Material
Wall Thickness
Liner Material
Liner thickness
Liquid Class
Pipe Config
Anomaly Diams
Transducer Model
Transducer Size
Xdcr Mount Mode
Spacing Offset
Number Index
Spacing Method
Ltn Value <in>
1020NFM-1D
ENTER Key
(continued)
Advertisement
Table of Contents
