Viewing The Hba1C Results In Graph Format; Viewing Patient Test Results - Siemens DCA Vantage Operator's Manual

Table of Contents

Advertisement

4. Select
Result Range
The Lower Limit screen displays.
5. Use the up and down arrows to set a HbA
For NGSP only, the lower limit cannot be lower than 2.0%.
NOTE:
6. Select
Next
.
The search results display.
Viewing the HbA
1c
You can view the HbA
patient ID and then narrow the search by using a date range.
Recalled results and trend graphs adapt to your configured Reporting
NOTE:
Units, Patient Reference Range, and User Corrections.
1. At the Home screen, select
2. From the Recall menu, select
3. Select
.
HbA1c
The HbA
Patient test List screen displays.
1c
4. Select
.
Graph
5. Use the keypad or external barcode reader to enter a Patient ID.
6. Select
.
Next
All HbA
results that match the patient ID are graphed.
1c
7. To change the graph date range, select
8. To print the graph to an external printer, select
The internal printer does not support printing graphs.
NOTE:

Viewing Patient Test Results

Use the Patient Test Result screen to view information about a specific patient.
1. At the Home screen, select
2. From the Recall menu, select
3. Select one of the following:
To view patient results for an HbA
To view patient results for an microalbumin/creatinine patient test
result, select
4. Select
View Last 10
NOTE:
You can view patient results from any search finding.
DCA Vantage Operator's Guide
.
Results in Graph Format
test results in a graph format. You can search by
1c
.
Recall
Patient Tests
.
Recall
Patient Tests
Microalbumin/Creatinine
.
value.
1c
.
.
Change
.
Print
.
patient test result, select
1c
.
.
HbA1c
79

Advertisement

Table of Contents
loading

Table of Contents